3
Mounting the Cable
• T-branching
(1) Confirm that the cable colors match the cable labels, and then place the cable in the
cover.
(2) Close the cover to sandwich the cable and secure the hook.
• Extending or Connecting a Terminating Resistor
Insert the cable tip all the way into the cable stopper in the cover.
4
Attaching the Housing
Confirm the colors again, and temporarily secure the housing to the cover.
Housing
Note Once it is attached, the housing cannot be removed from the cover. If you attempt to separate
the housing and the cover forcefully, you may damage the connector.
CJ-series CompoNet Master Unit Operation Manual for NJ-series CPU Unit (Cat. No. W493)
4 Installation and Wiring
Location of
cable stopper
4
4-21