Omron CJ Series Operation Manual page 98

3 Wiring Configurations
DCA5-4F10 Flat Cable II
Red: BS+ White: BDH Blue: BDL
Conductor
No.
1
2
3
4
Models other than the DCA5-4F10 can also be used as long as they conform to CompoNet specifica-
tions. Ask the cable manufacturer for applicable products.
Additional Information
For additional information on applicable cables to CompoNet and their manufacturers, refer to
the ODVA home page.
Precautions for Correct Use Precautions for Correct Use
The characteristics of each conductor in a Flat Cable I or Flat Cable II cable have been adjusted
to the specific application of the conductor as listed in the table. Check the insulator colors, and
use them only for the specified application.
3-10
Black: BS−
Insulation
Application
color
Red BS+ (communications power
supply positive side)
White BDH (signal high)
Blue BDL (signal low)
Black BS− (communications power
supply negative side)
CJ-series CompoNet Master Unit Operation Manual for NJ-series CPU Unit (Cat. No. W493)
Nominal cross-sec- Allowable current
tion
2 5 max.
0.75 mm
2
0.5 mm
2
0.5 mm
2 5 max.
0.75 mm
(A)
---
---