Figure 131 Alarm Event Setup; Table 82 Alarm Event Setup - ZyXEL Communications IES-1248-71 User Manual

Chapter 39 Alarm

Figure 131 Alarm Event Setup

The following table describes the labels in this screen.

Table 82 Alarm Event Setup

LABEL
Alarm Status
Alarm Port Setup
Index
Alarm
Condition Code
Condition
Facility
256
DESCRIPTION
Click Alarm Status to go to a screen that displays the alarms that are currently
in the system (see Section 39.2 on page
Click Alarm Port Setup to go to a screen where you can configure the alarm
severity threshold for recording alarms on an individual port(s). See
39.5 on page 258.
This field displays the index number of the alarm in the list.
This field displays the alarm category to which the alarm belongs.
eqpt represents equipment alarms.
dsl represents Digital Subscriber Line (DSL) alarms.
enet represents Ethernet alarms.
sys represents system alarms.
This field displays the condition code number for the specific alarm message.
This field displays a text description for the condition under which the alarm
applies.
This field displays the log facility (local1~local7) on the syslog server where the
system is to log this alarm. This is for alarms that send alarms to a syslog
server.
253).
Section
IES-1248-71/73 User's Guide