Igmp Filter Profile Show Command; Igmp Bandwidth Commands; Igmp Bandwidth Default Command; Figure 189 Igmp Filter Show Command Example - ZyXEL Communications IES-1248-71 User Manual

Chapter 50 IGMP Commands

50.3.5 IGMP Filter Profile Show Command

Syntax:
ras> switch igmpfilter profile show [<name>|*]
where
[<name>|*]
This command displays an IGMP filter profile's settings.
The following example displays the voice IGMP filter profile's settings.

Figure 189 IGMP Filter Show Command Example

ras> switch igmpfilter profile show voice
-------------------------------------------------------------------------

50.4 IGMP Bandwidth Commands

Use the IGMP bandwidth commands to set up bandwidth budgets for specific multicast
channels.

50.4.1 IGMP Bandwidth Default Command

Syntax:
ras> switch igmpsnoop bandwidth default <bandwidth>
where
<bandwidth>
338
The name of an IGMP filter profile or all of the IGMP filter
=
profiles <*>.
profile index
voice 1
voice 2
voice 3
voice 4
voice 5
voice 6
voice 7
voice 8
voice 9
voice 10
voice 11
voice 12
voice 13
voice 14
voice 15
voice 16
Allowed bandwidth between 1 and 1000 000 kbps (kilo bits per
=
second).
startip
224.1.1.10 224.1.1.44
0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0
IES-1248-71/73 User's Guide
endip