Ethernet Port Statistics Screen; Table 5 Home - ZyXEL Communications IES-1248-71 User Manual

Chapter 9 Home and Port Statistics Screens
Table 5 Home (continued)
LABEL
Status
Port Name
Media
Duplex
Up Time
xDSL
Status
Mode
Up/Down stream
Interleave/Fast
Up Time
Poll Interval(s)
Set Interval
Stop
Port
Clear Counter
Reset

9.1.1 Ethernet Port Statistics Screen

Use this screen to display statistics about an Ethernet port. To open this screen, click an
Ethernet port's number in the Home screen.
90
DESCRIPTION
This field displays whether the Ethernet port is connected (Up) or not (Down).
This field displays the name of the Ethernet port.
This field displays the type of media that this Ethernet port is using for a
connection (Copper or Fiber). "-" displays when the port is disabled or not
connected.
This field displays whether the port is using half or full-duplex communication. "-
" displays when the port is disabled or not connected.
This field shows the total amount of time in hours, minutes and seconds the
port's connection has been up. "--:--:--" displays when the port is disabled or not
connected.
The following fields are related to the ADSL ports.
This identifies the ADSL port. Click a port number to display that port's statistics
screen. The ADSL Port Statistics Screen
93.
This field shows whether the port is connected (Up) or not (Down).
This field shows which ADSL operational mode the port is set to use. "-"
displays when the port is not connected.
This field shows the number of kilobits per second that a port is set to transmit
and receive.
This field shows the port's ADSL latency mode (fast or interleave).
This field shows the total amount of time in hours, minutes and seconds the
port's connection has been up. "-" displays when the port is not connected.
The following fields and buttons apply to the whole screen.
The text box displays how often (in seconds) this screen refreshes. You may
change the refresh interval by typing a new number in the text box and then
clicking Set Interval.
Click Stop to halt system statistic polling.
Select a port from the Port drop-down list box and then click Clear Counter to
erase the recorded statistical information for that port.
Click this to set the Poll Interval(s) and Port fields to their default values and to
refresh the screen.
appears. See Section 9.1.2 on page
IES-1248-71/73 User's Guide