Table of Contents
Advertisement
C
H A P T E R
This chapter covers Simple Network Management Protocol (SNMP) with the IES-1248.
54.1 SNMP Commands
Use these commands to configure SNMP settings. See
information about SNMP.
54.1.1 Get Community Command
Syntax:
ras> sys snmp getcommunity <community>
where
<community>
Enter this command with the community to set the password.
54.1.2 Set Community Command
Syntax:
ras> sys snmp setcommunity <community>
where
<community>
Enter this command with the community to set the password.
54.1.3 Trusted Host Set Command
Syntax:
ras> sys snmp trusthost <ip>
where
<ip>
IES-1248-71/73 User's Guide
The password for the incoming Get- and GetNext- requests
=
from the management station.
The password for the incoming Set- requests from the
=
management station.
The IP address of a trusted host.
=
54
SNMP
Chapter 37 on page 241
for more
363
Advertisement
Table of Contents
Troubleshooting
