Table of Contents
Advertisement
The following example adds a PVC for 2684 routed mode traffic. It is for DSL port 1, VPI 8,
VCI 35. It sets the DEFVAL profile for downstream traffic shaping and for upstream traffic
policing. The CPE device's WAN IP address is 192.168.10.200 with a netmask of 32 and the
gateway's IP address is 192.168.10.102.
Figure 279 RPVC Set Command Example
ras> adsl rpvc set 1 8 35 DEFVAL,DEFVAL 192.168.10.200/32 192.168.10.102
56.7.6 RPVC Show Command
Syntax:
ras> adsl rpvc show <portlist>
where
<portlist>
This command lists the PVCs for handling 2684 routed mode traffic (RPVCs).
The following example displays the RPVCs for DSL port 1.
Figure 280 RPVC Show Command Example
ras> adsl rpvc show 1
port vpi
---- --- ---- ------------------ --------------- --------------------------
----
1
8
56.7.7 RPVC Delete Command
Syntax:
ras> adsl rpvc delete <portlist> <vpi> <vci>
where
<portlist>
<vpi>
<vci>
This command removes a PVC for 2684 routed mode traffic.
IES-1248-71/73 User's Guide
The port(s) for which you want to display the RPVCs.
=
You can specify a single ADSL port <1>, all ADSL ports <*> or
a list of ADSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
vci ip/netmask
35 192.168.10.200/32
The port(s) of the RPVC.
=
You can specify a single ADSL port <1>, all ADSL ports <*> or
a list of ADSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
The VPI of the RPVC.
=
The VCI of the RPVC.
=
Chapter 56 Virtual Channel Management
gateway ip
DS/US vcprofile
192.168.10.102
DEFVAL/DEFVAL
407
Advertisement
Table of Contents
Troubleshooting
