Dhcp Relay Option 82 (Agent Information) Sub-Option 2 (Remote Id); Option 82 Sub-Option 2 Enable Command; Option 82 Sub-Option 2 Disable Command; Option 82 Sub-Option 2 Set Command - ZyXEL Communications IES-1248-71 User Manual

Chapter 47 DHCP Commands
where
[<relay info>]
This command adds the specified information for the relay agent.
47.3 DHCP Relay Option 82 (Agent Information) Sub-option 2
(Remote ID)
Use the following commands to configure the DHCP relay Option 82 (agent information)
feature, sub-option 2. This feature applies regardless of whether or not the DHCP relay is on.

47.3.1 Option 82 Sub-option 2 Enable Command

Syntax:
ras> switch dhcprelay opt82sub2 enable
This command turns on the DHCP relay agent information (Option 82, Sub-option 2) feature.

47.3.2 Option 82 Sub-option 2 Disable Command

Syntax:
ras> switch dhcprelay opt82sub2 disable
This command turns off the DHCP relay agent information (Option 82, Sub-option 2) feature.

47.3.3 Option 82 Sub-option 2 Set Command

Syntax:
ras> switch dhcprelay opt82sub2 set [<relay info>]
where
[<relay info>]
This command adds the specified information for the relay agent.
316
Up to 23 ASCII characters of additional information for the
=
IES-1248 to add to the DHCP requests that it relays to a DHCP
server.
Examples of information you could add would be the name of
the IES-1248 or the ISP.
Up to 23 ASCII characters of additional information for the
=
IES-1248 to add to the DHCP requests that it relays to a DHCP
server.
Examples of information you could add would be the name of
the IES-1248 or the ISP.
IES-1248-71/73 User's Guide