Table of Contents
Advertisement
Chapter 53 Firmware and Configuration File Maintenance
This is a sample from a FTP session to transfer the computer file firmware.bin to the IES-
1248.
Figure 211 FTP Get Configuration File Example
ftp> get config-0 config.txt
This is a sample from a FTP session to transfer the IES-1248's current configuration file
(including the configuration files of all the IES-1248) to the computer file config.txt.
If your FTP client does not allow you to have a destination filename different than the source,
you will need to rename them as the IES-1248 only recognizes "config-0" and "ras". Be sure
you keep unaltered copies of the files for later use.
The following table is a summary. Please note that the internal filename refers to the filename
on the IES-1248 and the external filename refers to the filename not on the IES-1248, that is,
on your computer, local network or FTP site and so the name (but not the extension) may vary.
After uploading new firmware, use the sys version command on the IES-1248 to confirm that
you have uploaded the correct firmware version.
Table 97 Filename Conventions
FILE TYPE
Configuration File
Firmware
53.3 Editable Configuration File
The configuration file can be downloaded as a plain-text (ASCII) file. Edits to the
configuration can be made to this file before it is uploaded again to the IES-1248.
You can change the ".dat" file to a ".txt" file and still upload it back to the IES-
1248.
Do not upload any invalid files to the IES-1248's configuration file, as it may
permanently damage your IES-1248.
53.3.1 Editable Configuration File Backup
Configure your system, and then use FTP to backup the plain-text configuration file onto your
computer. Do the following to backup the configuration file:
358
INTERNAL
EXTERNAL
NAME
NAME
config-0
*.dat
ras
*.bin
DESCRIPTION
This is the configuration filename for the
IES-1248.
This is the Operating System firmware on
the IES-1248.
IES-1248-71/73 User's Guide
Advertisement
Table of Contents
Troubleshooting
