41.2 Log Format
The common format of the system logs is: <item no> <time> <process> <type>
<log message>.
Table 86 Log Format
LABEL
<item no>
<time>
<process>
<type>
<log message>
41.2.1 Log Messages
The following table lists and describes the system log messages.
Table 87 Log Messages
LOG MESSAGE
ADSL <port> Link
Up(SN=<seq no>): <ds
rate>/<us rate>!
or
ADSL Link Info: NM:<ds
NM>/<us NM>!
ADSL <port> Link
Down(SN=<seq no>)!
Session Begin!
Session End!
Incorrect Password!
Received Firmware
Checksum Error!
Received Firmware Size
too large!
Received Firmware
Invalid!
Received File <file>!
IES-1248-71/73 User's Guide
DESCRIPTION
This is the index number of the log entry.
This is the time and date when the log was created.
This is the process that created the log.
This identifies what kind of log it is. "INFO" identifies an information log.
"WARN" identifies a warning log.
This is the log's detailed information (see
TYPE
DESCRIPTION
An ADSL port established a connection.
INFO
<port> - port number
<seq no> - sequence number of the connection
<ds rate> - downstream rate
<us rate> - upstream rate
<us NM> - upstream noise margin
<ds NM> - downstream noise margin
An ADSL port lost its connection.
WARN
<port> - port number
<seq no> - sequence number of the connection
A console, telnet or FTP session has begun (see the
INFO
<process> field for the type of session).
A console telnet or FTP session has terminated (see the
INFO
<process> field for the type of session).
Someone attempted to use the wrong password to start a
WARN
console, telnet or FTP session (see the <process> field for
the type of session).
A checksum error was detected during an attempted FTP
WARN
firmware upload.
The file size was too large with an attempted FTP firmware
WARN
upload.
Someone attempted to upload a firmware file with a wrong
WARN
identity via FTP.
A file was uploaded to the IES-1248 by FTP.
INFO
<file> - received file's name
Chapter 41 Diagnostic
Table 87 on page
267).
267