Table of Contents
Advertisement
Chapter 12 User Account
Table 13 User Account (continued)
LABEL
Privilege
Add
Cancel
Index
Enable
Name
Privilege
Select
Delete
Cancel
12.2 Authentication Screen
Use this screen to set up the authentication policies and settings by which administrators can
access the IES-1248.
To open this screen, click Basic Setting, User Account, Authentication.
Figure 51 Authentication
108
DESCRIPTION
Select a privilege level to determine which screens the administrator can use.
There is a high, medium or low privilege level for each command.
Select high to allow the administrator to use all commands including the lower
privilege commands. High privilege commands include things like creating
administrator accounts, restarting the system and resetting the factory defaults.
Select middle to allow the administrator to use middle or low privilege
commands.
Select low to allow the administrator to use only low privilege commands. Low
privilege commands are read only.
Click Add to save your changes to the IES-1248's volatile memory. The IES-
1248 loses these changes if it is turned off or loses power, so use the Config
Save link on the navigation panel to save your changes to the non-volatile
memory when you are done configuring.
Click Cancel to begin configuring the fields again.
This field displays the number of the user account. Click an account's index
number to use the top of the screen to edit it.
This field displays a "V " if you have the administrator account turned on. It
displays a "-" if the administrator account is turned off.
This field displays the administrator account's user name.
This field displays the administrator account's access level (high, middle or low).
Select this check box and click the Delete button to remove an administrator
account.
Select an administrator account's check box and click this button to remove the
administrator account.
Click Cancel to start configuring the screen afresh.
IES-1248-71/73 User's Guide
Advertisement
Table of Contents
Troubleshooting
