ZyXEL Communications IES-1248-71 User Manual page 285

Table 92 Commands (continued)
CLASS COMMAND
dsnompsd
uscarrier
uscarrier
dscarrier0
dscarrier0
dscarrier1
annexl enable
annexl disable
annexl show
sra enable
sra disable
sra show
pmm enable
pmm disable
pmm show
pmm set
pmm param
IES-1248-71/73 User's Guide
PARAMETERS DESCRIPTION
Display or set Maximum
<portNo> [<max
nominal transmit PSD in the DS
nominal psd>]
direction.
(IES-1248-71)
<port number>
[<m0>]
Display or set US carrier mask
from tone 0 to 31.
(IES-1248-73)
<port number>
[<m0> <m1>]
Display or set US carrier mask
from tone 0 to 63.
(IES-1248-71)
<port> [<m1> <m2>
<m3> <m4> <m5> Display or set DS carrier mask
from tone 32 to 255
<m6> <m7>]
(IES-1248-73)
<port> [<m2> <m3>
<m4> <m5> <m6> Display or set DS carrier mask
from tone 64 to 255
<m7>]
Display or set DS carrier mask
<port> [<m0> <m1>
from tone 256 to 511.
<m2> <m3> <m4>
<m5> <m6> <m7>]
(IES-1248-71)
<portlist>
Turns on the Annex L feature on
the specified port(s).
(IES-1248-71)
<portlist>
Turns off the Annex L feature on
the specified port(s).
(IES-1248-71)
<portlist>
Displays the Annex L feature
setting for the specified port(s).
Turns on Seamless Rate
<portlist>
Adaptation (SRA) ADSL2+ on the
specified port(s).
Turns off SRA ADSL2+ on the
<portlist>
specified port(s).
Displays the SRA ADSL2+ setting
<portlist>
for the specified port(s).
Turns on the Power Management
<portlist> <L2|L3>
feature on the specified port(s).
Turns off the Power Management
<portlist>
feature on the specified port(s).
Displays the Power Management
<portlist>
feature setting for the specified
port(s).
Sets the Power Management
<portlist>
mode
<L0|L2|L3>
Displays or sets the Power
<portlist>
Management parameter
[<l0time> <l2time>
<l2atpr>
<l2atprt>][<max_l2
rate> <min_l2rate>
<l0tol2_rate>]
Chapter 44 Commands
P
H/H
H/H
H/H
H/H
H/H
H/H
H/H
H/H
M/L
H/H
H/H
M/L
H/H
H/H
M/L
H/H
H/H
285