ZyXEL Communications IES-1248-71 User Manual page 284

Chapter 44 Commands
Table 92 Commands (continued)
CLASS COMMAND
tlspvc show
queuemap show
queuemap set
linediag setld
linediag getld
linediag
getld992_3
linediag toneDiag
alarmprofile show
alarmprofile set
alarmprofile
delete
alarmprofile map
alarmprofile
showmap
alarmprofile
showport
usnompsd
284
PARAMETERS DESCRIPTION
Display TLS PVC setting by 'port'
portlist [detail]
Displays the DSL priority level to
physical queue mapping.
Set the DSL priority level to
<priority> <queue
physical queue mapping.
level>
Sets the specified port to line
<port number>
diagnostic mode.
Displays the specified port line
<port number>
diagnostics.
Displays the specified port line
<port number>
diagnostics.
Displays the specified port line
<port number>
diagnostics.
Displays alarm profiles and their
[profile]
settings.
Configures an alarm profile.
<profile> [<atuc
lofs> <atur lofs>
<atuc loss> <atur
loss> <atuc olls>
<atuc lprs> <atur
lprs> <atuc ess>
<atur ess> <atuc
fast rateup> <atur
fast rateup> <atuc
interleave rateup>
<atur interleave
rateup> <atuc fast
ratedown> <atur
fast ratedown>
<atuc interleave
ratedown> <atur
interleave
ratedown> <init
fail enable> <atuc
fail fast> <atuc
ses> <atur ses>
<atuc uas> <atur
uas>]
Removes an alarm profile.
<profile>
Maps specified ADSL ports to an
<portlist>
alarm profile.
<profile>
Displays alarm profile to ADSL
[port number]
port mapping.
Displays which alarm profile
<port number>
parameters are mapped to an
ADSL port.
Display or set Maximum nominal
<portNo> [<max
transmit PSD in the US direction.
nominal psd>]
P
L/L
M/L
H/H
H/H
L/L
L/L
L/L
L/L
H/H
H/H
H/H
L/L
L/~
H/H
IES-1248-71/73 User's Guide