ZyXEL Communications IES-1248-71 User Manual page 103

Table 11 System Info (continued)
LABEL
DSP Code Version
Hardware Version
Serial Number
Ethernet Address
Hardware Monitor
Enable
Temperature Unit
Temperature
Current
MAX
MIN
Average
Threshold (Low)
Threshold (Hi)
Status
Voltage(V)
Current
MAX
MIN
Average
Threshold (Low)
Threshold (Hi)
Status
Fan Speed (RPM)
Current
MAX
MIN
Average
Threshold (Low)
Threshold (Hi)
IES-1248-71/73 User's Guide
DESCRIPTION
This field displays the Digital Signal Processor firmware version number. This is
the modem code firmware.
This is the version of the physical device hardware. This field may be blank.
This is the individual identification number assigned to the device at the factory.
This field may be blank.
This field refers to the Ethernet MAC (Media Access Control) address of the
device.
Select this check box to turn the hardware monitor on or clear it to turn the
hardware monitor off.
Select C to display all temperature measurements in degrees Celsius. Select F
to display all temperature measurements in degrees Fahrenheit.
Each temperature sensor can detect and report the temperature. Temperature
sensor 1 is near the ADSL chipset. Temperature sensor 2 is near the central
processing unit. Temperature sensor 3 is at the hardware monitor chip.
This shows the current temperature at this sensor.
This field displays the maximum temperature measured at this sensor.
This field displays the minimum temperature measured at this sensor.
This field displays the average temperature measured at this sensor.
This field displays the lowest temperature limit at this sensor.
This field displays the highest temperature limit at this sensor.
This field displays Normal for temperatures below the threshold and Over for
those above.
The power supply for each voltage has a sensor that can detect and report the
voltage.
This is the current voltage reading.
This field displays the maximum voltage measured at this point.
This field displays the minimum voltage measured at this point.
This field displays the average voltage measured at this sensor.
This field displays the lowest voltage limit at this sensor.
This field displays the highest voltage limit at this sensor.
Normal indicates that the voltage is within an acceptable operating range at this
point; otherwise Abnormal is displayed.
A properly functioning fan is an essential component (along with a sufficiently
ventilated, cool operating environment) in order for the device to stay within the
temperature threshold. Each fan has a sensor that can detect and report the
fan's RPM (Rotations Per Minute).
This is the current RPM reading.
This field displays the maximum RPM measured at this point.
This field displays the minimum RPM measured at this point.
This field displays the average RPM measured at this sensor.
This field displays the lowest RPM limit at this sensor.
This field displays the highest RPM limit at this sensor.
Chapter 10 System Information
103