Creating The Project; Opening The Softune Workbench - Fujitsu F2MC-16FX MB2198 Getting Started

Emulator system

Table of Contents

2 Creating the Project

ENTERING THE SOURCE CODE

Now you can open the Softune Workbench. For installation of this tool please refer to the

Installation Guide Application Note MCU-AN-390209-E.

Choose the Menu File > Open. The following pop up window will occur:

Click "OK" for "Workspace/Project file", and then browse to the file "Led.wsp". Open it.

MCU-AN-300217-E-V10

MB2198 – Getting Started

Chapter 2 Creating the Project

Then the following project structure will be displayed on

the left side of the Softune screen.

The top level is the Workspace itself: "Led".

The next level contains the ABS-File of the Project,

which contains the compiled program.

The source files, their dependencies, and the debugger

settings follow.

For the moment the Source Files are in the point of

interest.

Open the Source File of the Main Program Main.c by

double clicking it in the window shown on the left.

Now a text editor window will open, which shows the

contents of Main.c. It will look like this:

- 10 -

Table of Contents