System Configuration - Fujitsu MB2147-01 Application Note

CHAPTER 2 CONNECTION METHOD
2.1

System Configuration

The emulator is designed to be connected to and controlled from a host machine. The
host machine uses emulator debugger software to control the emulator. For
information on using the software, see the Softune Workbench Operation Manual.
I System Configuration
Figure 2.1-1 "System Configuration (if a DSU-FR cable is used)" and Figure 2.1-2 "System
Configuration (if an adapter board is used)" show the system configuration of the emulator.
Figure 2.1-1 System Configuration (if a DSU-FR cable is used)
Host machine
Figure 2.1-2 System Configuration (if an adapter unit is used)
Host machine
22
Emulator
Test equipment
(Logic analyzer, etc.)
DSU-FR cable (including an attached cable)*
RS-232C cable *, USB cable *, or LAN cable*
BNC cable*
*: Not included with this product
Emulator
Test equipment
(Logic analyzer, etc.)
Adapter unit* (Adapter board plus flat cable plus header board*)
RS-232C cable*, USB cable*, or LAN cable*
BNC cable*
*: Not included with this product
User system
User system