Lag Hashing Fields Used For 7210 Sas-Mxp; Table 12: Lag Hashing Mechanism For Services Configured On 7210 Sas-Mxp Devices - Alcatel-Lucent 7210 SAS M Interface Configuration Manual

LAG

LAG Hashing Fields used for 7210 SAS-Mxp

Table 12: LAG Hashing mechanism for services configured on 7210 SAS-Mxp devices

Services and Traffic Direction
VPLS and Epipe Services:
SAP to SAP
SDP to SAP
VPLS service:
SAP to SDP
Epipe service:
SAP to SDP
VPLS service:
SDP to SDP
MPLS – LSR
Page 66
ration Guide
Packet fields used for Hashing for different traffic types
All traffic (including VPLS Learnt and Unlearnt): Based on
LAG SAP parameters: service-id, lag_index,
encap_value, service_vlan, sap_index.
IP traffic (Learnt and Unlearnt): Source and Destination IP,
Source and Destination L4 ports, Ingress Port-Id.
MPLS traffic: MPLS label stack (Two labels deep), Ingress
Port-Id.
Non-IP traffic (Learnt and Unlearnt): Source and Destination
MAC, EtherType, VLAN, Ingress Port-Id.
IP traffic: Source and Destination IP, Source and Destination
L4 ports, Ingress Port-Id.
MPLS traffic: MPLS label stack (Two labels deep), Ingress
Port-Id.
Non-IP traffic: Source and Destination MAC, EtherType,
VLAN, Ingress Port-Id.
All traffic: Source and Destination MAC (Outer MACs
inside the payload, just after the MPLS header), Ingress Port-
Id.
All traffic: MPLS label stack (Two labels deep), Ingress
Port-Id.
7210 SAS M, T, X, R6, R12, Mxp Interface Configu-