Alcatel-Lucent 7210 SAS M Interface Configuration Manual page 316

poe
Syntax poe [detail]
Context show>port>ethernet
Description This command displays the poe support status.
Parameters
detail — Shows detailed information.
The following table describes the poe detail output fields.
PSE Maximum
Power Budget
PSE Power Com-
mitted
PSE Power Avail-
able
Port-Id
PoE Admin/state
PoE Oper/state
Class
Output Sample Output
A:7210SAST>show>system# poe detail
============================================================
PoE Information
============================================================
PSE Maximum Power Budget
PSE Power Committed
PSE Power Available
============================================================
PoE Port Information
============================================================
Port-Id
------------------------------------------------------------
1/1/19
1/1/20
1/1/21
1/1/22
============================================================
7210 SAS M, T, X, R6, R12, Mxp Interface Configuration Guide
Label
Sum of the power supplied to all ports as determined by class
Maximum Power Budget – Power Consumed
Displays the port ID.
Indicates whether PoE/PoE+ is enabled on the port.
Indicates whether power is supplied to the port or not.
Displays the Class of the PoE device connected to the port. Class of the
device is classified by software as per standard, based on the power
consumed by the device.
: 60 watts
: 0 watts
: 60 watts
PoE Admin/ PoE Oper/
State State
Disabled NotApplicable
Disabled NotApplicable
Disabled NotApplicable
Disabled NotApplicable
Interface Configuration
Description
Class
None (0 W)
None (0 W)
None (0 W)
None (0 W)
Page 311