Alcatel-Lucent 7210 SAS M Interface Configuration Manual page 58

Table 8: LAG Hashing mechanism for services configured on 7210 SAS-X devices
Services and Traffic Direction
(For example: SAP to SDP)
Network port IPv6 interface:
IPv6 network interface to IPv6
network interface
IES (Multicast IP traffic)
IP interface (Network or SAP) to
IP interface (SAP)
Network Port IP
(Multicast IP traffic)
IP interface (Network or SAP) to
IP interface (Network)
1. VPLS service, SDP to SDP: Test has been performed only for VC label variation with
2. In the LSR case, incoming labels are used for hashing.
3. 'Learnt' wherever mentioned corresponds to Destination MAC.
4. Source/Destination MAC always refer to 'Customer Source/Destination MACs' unless
7210 SAS M, T, X, R6, R12, Mxp Interface Configuration Guide
Packet fields used for Hashing for different
traffic types
IPv6 unicast traffic: Source and Destination IP,
Source and Destination L4 ports, Ingress Port-Id,
VLAN.
IPv4 Multicast traffic: Source and Destination
IP, Source and Destination L4 ports, Ingress
Port-Id.
interface IPv4 Multicast traffic: Source and Destination
IP, Source and Destination L4 ports, Ingress
Port-Id.
the same Tunnel label.
otherwise specified.
Interface Configuration
Page 53