Alcatel-Lucent 7210 SAS M Interface Configuration Manual page 55

LAG
LAG Hashing Fields used for 7210 SAS-M (Network
mode)
Table 7:
M devices
Services and Traffic Direction
(For example: SAP to SDP)
Network port IPv6 interface:
IPv6 network interface to IPv6
network interface
IES (Multicast IP traffic)
IP interface (Network or SAP) to
IP interface (SAP)
Network
(Multicast IP traffic)
IP interface (Network or SAP) to
IP interface (Network)
1. VPLS service, SDP to SDP: Test has been performed only for VC label variation with the
2. In the LSR case, incoming labels are used for hashing.
3. 'Learnt' wherever mentioned corresponds to Destination MAC.
4. Source/Destination MAC refer to 'Customer Source/Destination MACs' unless otherwise
Page 50
ration Guide
LAG Hashing mechanism for services configured in Network Mode on 7210 SAS-
Port IP interface
same Tunnel label.
specified
Packet fields used for Hashing for different
traffic types
IPv6 unicast traffic: Source and Destination
IP, Source and Destination L4 ports, Ingress
Port-Id.
IPv4 Multicast traffic: Source and Destination
IP, Source and Destination L4 ports, Ingress
Port-Id.
IPv4 Multicast traffic: Source and Destination
IP, Source and Destination L4 ports, Ingress
Port-Id.
7210 SAS M, T, X, R6, R12, Mxp Interface Configu-