Alcatel-Lucent 7210 SAS M Interface Configuration Manual page 332

Port Monitor Commands
port
Syntax port port-id [port-id...(up to 5 max)] [interval seconds] [repeat repeat] [absolute | rate]
[multiclass]
Context monitor
Description This command enables port traffic monitoring. The specified port(s) statistical information displays at the
configured interval until the configured count is reached.
The first screen displays the current statistics related to the specified port(s). The subsequent statistical
information listed for each interval is displayed as a delta to the previous display.
When the keyword rate is specified, the "rate per second" for each statistic is displayed instead of the delta.
Monitor commands are similar to show commands but only statistical information displays. Monitor
commands display the selected statistics according to the configured number of times at the interval
specified.
Parameters
port port-id — Specify up to 5 port IDs.
Syntax:
interval seconds
Configures the interval for each display in seconds.
Default
Values
repeat repeat — Configures how many times the command is repeated.
Default
Values
absolute — When the absolute keyword is specified, the raw statistics are displayed, without processing.
No calculations are performed on the delta or rate statistics.
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed instead of the
delta.
Sample Output
A:ALA-12>monitor# port 1/4 interval 3 repeat 3 absolute
===============================================================================
Monitor statistics for Port 1/4
===============================================================================
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
7210 SAS M, T, X, R6, R12, Mxp Interface Configuration Guide
port-id slot/mda/port
10 seconds
3 — 60
10
1 — 999
Interface Configuration
Input Output
Page 327