Alcatel-Lucent 7210 SAS M Interface Configuration Manual page 132

Ethernet Ring Commands
config
7210 SAS M, T, X, R6, R12, Mxp Interface Configuration Guide
— eth-ring ring-id
— no eth-ring
— [no] ccm-hold-time {down
— [no] compatible-version
— description description-string
— no description
— [no] guard-time
— [no] revert-time
— [no] rpl-node
— [no] node-id mac
— [no] sub-ring
— [no]
— [no] path {a | b} [{ port-id | lag-id } raps-tag qtag[.qtag] ]
— description
— [no]
— eth-cfm
— [no]
down-timeout |
version
time
time
{owner | nbr}
{virtual-link | non-virtual-link}
interconnect {ring-id ring-id | vpls}
— [no] propagate-topology-change
description-string
rpl-end
— [no] mep mep-id domain md-index association ma-index
— [no] ccm-enable
— [no] ccm-ltm-priority
— [no] control-mep
— [no] control-sap-tag
SAS-X and SAS-R6 and SAS-R12)
— [no] description
— [no] eth-test-enable
— [no]
— bit-error-threshold
— low-priority-defect
con|errXcon|xcon|noXcon}
— mac-address
— one-way-delay-threshold
— [no] shutdown
shutdown
Command Reference
up up-timeout}
priority
tag-range (Supported only on 7210
description-string
test-pattern {all-zeros | all-ones} [crc-enable]
bit-errors
{allDef|macRemErrXcon|remErrX-
mac-address
seconds
Page 127