Alcatel-Lucent 7210 SAS M Interface Configuration Manual page 230

Show CardState Output — The following table describes show card state output fields.
Slot/MDA
Provisioned Type
Equipped Type
Admin State
Operational
State
Num Ports
Num MDA
Comments
Sample Output
*A:MTU-A# show card state
===============================================================================
Card State
===============================================================================
Slot/
Id
-------------------------------------------------------------------------------
1
1/1
A
===============================================================================
* indicates that the corresponding row element may have been truncated.
Sample output for 7210 SAS-X:
A:7210-SAS-X> show card state
===============================================================================
Card State
===============================================================================
Slot/
Id
-------------------------------------------------------------------------------
1
1/1
7210 SAS M, T, X, R6, R12, Mxp Interface Configuration Guide
Label
The slot number of the card in the chassis.
The card type that is configured for the slot.
The card type that is actually populated in the slot.
Up — The card is administratively up.
Down — The card is administratively down.
Up — The card is operationally up.
provisioned — There is no card in the slot but it has been pre-
configured.
The number of ports available on the MDA.
The number of MDAs installed.
Indicates whether the SF/CPM is the active or standby.
Provisioned Equipped
Type Type
iom-24g iom-24g
m24-100fx-1gb-s* m24-100fx-1gb-s* up
sfm-24g sfm-24g
Provisioned Equipped
Type Type
iom-sas iom-sas
m24-1gb+2-10gb m24-1gb+2-10gb
Description
Admin Operational Num
State State Ports MDA
up up
up 24
up up
Admin Operational Num
State State Ports MDA
up up
up up 26
Interface Configuration
Num Comments
2
Active
Num Comments
2
Page 225