Alcatel-Lucent 7210 SAS M Interface Configuration Manual page 133

Card, MDA, and Port Command Reference
Show Commands
show
Page 128
Guide
— chassis [environment] [power-supply]
— card [slot-number] [detail]
— card state
— card [slot-number] active-resource-profile
— pools mda-id[/port] [access-app [pool-name]]
— pools mda-id[/port] [network-app [pool-name]]
— lag [lag-id] [detail] [statistics]
— lag lag-id associations
— lag [lag-id] description
— lag [lag-id] port
— port port-id [detail]
— port port-id description
— port port-id associations
— port port-id dot1x [detail]
— port port-id ethernet [efm-oam | detail]
— port [A1] [detail] [statistics] [description]
— port port-id acr [detail] (Not supported on 7210 SAS-X)
— lldp [nearest-bridge | nearest-non-tpmr | nearest-customer] [remote-info]
— redundancy
— multi-chassis
— mc-lag peer ip-address [lag lag-id]
— mc-lag [peer ip-address [lag lag-id]] statistics
— sync
— sync
— sync peer [ ip-address ] statistics
— system
— internal-loopback-ports
7210 SAS M, T, X, R6, R12, Mxp Interface Configuration
all
peer [ ip-address ]
peer [ ip-address ] detail
[detail]
[detail]poe [detail]