LAG Commands
lag
Syntax
lag [lag-id] [detail] [statistics]
lag lag-id associations
lag [lag-id] description
lag [lag-id] port
Context
show
Description
This command displays Link Aggregation Group (LAG) information.
If no command line options are specified, a summary listing of all LAGs is displayed.
Parameters
lag-id — Displays only information on the specified LAG ID.
Default
Values
detail — Displays detailed LAG information.
Default
statistics — Displays LAG statistics information.
associations — Displays a list of current router interfaces to which the LAG is assigned.
description — Displays LAG description strings.
port — Display the LAG ports
Output
LAG Output — The following table describes LAG output fields.
LAG ID
Adm
Opr
Port-Threshold
7210 SAS M, T, X, R6, R12, Mxp Interface Configuration Guide
Display information for all LAG IDs.
SAS-M,X,T, Mxp- [1..25]
SAS-R6, R12-[1..63]
Displays summary information.
Label
The LAG ID that the port is assigned to.
Up — The LAG is administratively up.
Down — The LAG is administratively down.
Up — The LAG is operationally up.
Down — The LAG is operationally down.
The number of operational links for the LAG at or below which the
configured action will be invoked.
Interface Configuration
Description
Page 315