Alcatel-Lucent 7210 SAS M Interface Configuration Manual page 255

Port Show Commands
Port Show Commands
port
Syntax port port-id[detail]
port port-id description
port port-id associations
port port-id ethernet [efm-oam | detail]
port port-id acr [detail] (not supported on 7210 SAS-X)
port port-id dot1x [detail]
port port-id vport [vport-name] associations
port [A1] [detail] [statistics] [description]
Context show
Description This command displays port information.
If no command line options are specified, the command port displays summary information for all ports on
provisioned MDAs.
Parameters
port-id — Specifies the physical port ID in the form slot/mda/port.
Syntax
MDA Values
MDA Values
Slot Values
Port Values
associations — Displays a list of current router interfaces to which the port is associated.
description — Displays port description strings.
dot1x — Displays information.about 802.1x status and statistics.
ethernet — Displays ethernet port information.
acr — Displays ACR-capable port information.
Port Output — The following tables describe port output fields:
•
•
•
Page 250
Guide
port-id
1, 2 (for 7210 SAS-M)
1 (for 7210 SAS-X)
1 — 24 (depending on the MDA type)
efm-oam — Displays EFM OAM information.
detail — Displays detailed information about the Ethernet port.
A1 — Displays the out-of-band Ethernet port information.
General Port Output Fields on page 251
Entering port ranges: on page 173
Specific Port Output Fields on page 255
7210 SAS M, T, X, R6, R12, Mxp Interface Configuration
slot[/mda[/port]]
1