Port Show Commands
*A:SAST>show>system#
============================================================
PoE Information
============================================================
PSE Maximum Power Budget
PSE Power Consumed
PSE Power Available
============================================================
PoE Port Information
============================================================
Port-Id
------------------------------------------------------------
1/1/19
1/1/20
1/1/21
1/1/22
============================================================
A:7210SAST>show>system#
internal-loopback-ports
Syntax
internal-loopback-ports [detail]
Context
show>system
Description
This command displays information about internal loopback ports.
Parameters
Detail — keyword - includes application information
Command to display the list of loopback ports assigned to different OAM tools and also the list of
virtual internal port(s) available and its current association.
Sample Output for 7210 SAS-M
*A:7210SAS>config>port# show system internal-loopback-ports detail
===============================================================================
Internal Loopback Port Status
===============================================================================
Port
Id
-------------------------------------------------------------------------------
1/1/12
1/1/25
========================================
Mac-swap Application Status
========================================
Enabled
Test Service Id
Page 312
Guide
: 60 watts
: 0 watts
: 60 watts
PoE Admin/
PoE Oper/
State
State
Enabled
Off
Enabled
Off
Enabled
Off
Enabled
Off
Loopback
Type
Physical
Virtual
: Yes
: 1
7210 SAS M, T, X, R6, R12, Mxp Interface Configuration
Class
None (0 W)
None (0 W)
None (0 W)
None (0 W)
Application
Service
Enabled
Mac-Swap
Yes
Mac-Swap
No