Alcatel-Lucent 7210 SAS M Interface Configuration Manual page 142

Interface QoS Commands
access
Syntax access
Context config>port
Description
This command enables the access context to configure egress and ingress pool policy parameters.
network
Syntax network
Context config>port
Description
This command enables the network context to configure egress and ingress pool policy parameters.
uplink
Syntax uplink
Context config>port>access
Description
This command enables the context to configure access pool parameters.
egress
Syntax egress
Context config>port>access
config>port>network
config>port>uplink
Description This command enables the context to configure egress buffer pool parameters which define the percentage
of the pool buffers that are used for CBS calculations and specify the slope policy that is configured in the
config>qos>slope-policy context.
7210 SAS M, T, X, R6, R12, Mxp Interface Configuration Guide
Interface Configuration
Page 137