Alcatel-Lucent 7210 SAS M Interface Configuration Manual page 53

LAG
LAG Hashing Fields used for 7210 SAS-M (Network
mode)
Table 7:
M devices
Services and Traffic Direction
(For example: SAP to SDP)
PBB VPLS service:
Originating PBB BEB traffic
(that is, I-SAP to B-SAP)
PBB VPLS service:
Terminating PBB BEB traffic
(that is, B-SAP to I-SAP)
PBB Epipe service:
Originating PBB BEB traffic
(that is, PBB Epipe I-SAP to B-
SAP)
PBB Epipe service:
Terminating PBB BEB traffic
(PBB Epipe SAP to B-SAP)
Page 48
ration Guide
LAG Hashing mechanism for services configured in Network Mode on 7210 SAS-
7210 SAS M, T, X, R6, R12, Mxp Interface Configu-
Packet fields used for Hashing for different
traffic types
IP traffic (learnt): Source and Destination IP,
Source and Destination L4 ports
IP traffic (unlearnt): Source and Destination
IP, Source and Destination L4 ports, Ingress
Port-Id
L2/non-IP traffic (learnt):
EtherType, VLAN
L2/non-IP traffic (unlearnt): CSA, CDA,
EtherType, VLAN, Ingress Port-Id.
IP traffic (learnt): CSA, CDA
IP traffic (unlearnt): CSA, CDA, Ingress Port-
Id
L2/non-IP traffic (learnt):
EtherType
L2/non-IP traffic (unlearnt): CSA, CDA,
EtherType, Ingress Port-Id.
IP traffic: Source and Destination IP, Source
and Destination L4 ports, Ingress Port-Id
L2/non-IP traffic: CSA, CDA, EtherType,
VLAN, Ingress Port-Id
IP traffic: CSA, CDA
L2/non-IP traffic: CSA, CDA, EtherType
CSA, CDA,
CSA, CDA,