Alcatel-Lucent 7210 SAS M Interface Configuration Manual page 65

LAG
LAG Hashing Fields used for 7210 SAS-T Network Mode
Services and Traffic Direction
PBB VPLS service:
PBB BCB Traffic (that is, B-sap to
B-sap)
PBB VPLS service:
Originating PBB BEB traffic (that
is, I-SAP to B-SAP)
PBB VPLS service:
Terminating PBB BEB traffic (that
is, B-SAP to I-SAP)
PBB Epipe service:
Originating PBB BEB traffic (that
is, PBB Epipe I-SAP to B-SAP)
Page 60
ration Guide
Packet fields used for Hashing for different
traffic types
IP traffic (learnt): Source and Destination IP,
src & dst L4 ports
IP traffic (unlearnt): Source and Destination
IP, Source and Destination L4 ports, Ingress
Port-Id.
L2/non-IP traffic (learnt): BDA, BSA
L2/non-IP traffic (unlearnt): BDA, BSA,
ISID, Ingress Port-Id
IP traffic (learnt): Source and Destination IP,
Source and Destination L4 ports
IP traffic (unlearnt): Source and Destination
IP, Source and Destination L4 ports, Ingress
Port-Id
L2/non-IP traffic (learnt): CSA, CDA,
EtherType, VLAN
L2/non-IP traffic (unlearnt): CSA, CDA,
EtherType, VLAN, Ingress Port-Id.
IP traffic (learnt): CSA, CDA
IP traffic (unlearnt): CSA, CDA, Ingress Port-
Id
L2/non-IP traffic (learnt): CSA, CDA,
EtherType
L2/non-IP traffic (unlearnt): CSA, CDA,
EtherType, Ingress Port-Id.
IP traffic: Source and Destination IP, Source
and Destination L4 ports, Ingress Port-Id
L2/non-IP traffic: CSA, CDA, EtherType,
VLAN, Ingress Port-Id
7210 SAS M, T, X, R6, R12, Mxp Interface Configu-