Alcatel-Lucent 7210 SAS M Interface Configuration Manual page 294

Service access switch
Hide thumbs Also See for 7210 SAS M:
Table of Contents

Advertisement

Errors
===============================================================================
* indicates that the corresponding row element may have been truncated.
===============================================================================
Port Statistics
===============================================================================
-------------------------------------------------------------------------------
Unicast Packets
Multicast Packets
Broadcast Packets
Discards
Unknown Proto Discards
===============================================================================
===============================================================================
Ethernet-like Medium Statistics
===============================================================================
Alignment Errors :
FCS Errors
SQE Test Errors
CSE
Too long Frames
Symbol Errors
===============================================================================
Ethernet Output — The following table describes Ethernet output fields.
Broadcast Pckts
Multicast Pckets
Undersize Pckets
7210 SAS M, T, X, R6, R12, Mxp Interface Configuration Guide
:
:
:
:
:
Label
The number of packets, delivered by this sub-layer to a higher (sub-)
layer, which were addressed to a broadcast address at this sub-layer.
The total number of packets that higher-level protocols requested be
transmitted, and which were addressed to a multicast address at this
sub-layer, including those that were discarded or not sent.
For a MAC layer protocol, this includes both Group and Functional
addresses.
The number of packets, delivered by this sub-layer to a higher (sub-)
layer, which were addressed to a multicast address at this sub-layer.
For a MAC layer protocol, this includes both Group and Functional
addresses. The total number of packets that higher-level protocols
requested be transmitted, and which were addressed to a multicast
address at this sub-layer, including those that were discarded or not
sent. For a MAC layer protocol, this includes both Group and Func-
tional addresses.
The total number of packets received that were less than 64 octets long
(excluding framing bits, but including FCS octets) and were otherwise
well formed.
2651
Input
142210189554
0
Sngl Collisions
1095
Mult Collisions
0
Late Collisions
0
Excess Collisns
0
Int MAC Tx Errs
1509
Int MAC Rx Errs
Description
Interface Configuration
Output
0
0
0
0
:
:
:
:
:
:
Page 289
0
0
0
0
0
0
0
0
0
0
0

Advertisement

Table of Contents
loading

This manual is also suitable for:

7210 sas t7210 sas x7210 sas r67210 sas mxp os7210 sas r12

Table of Contents