Alcatel-Lucent 1665 Installation Manual page 259

Connecting adjacent network elements
........................................................................................................................................................................
................................................................................................................................................
31 LAPD Roll:
For
................................................................................................................................................
32
Click Apply to send the command.
................................................................................................................................................
33
Set the timing to Free Running at LT-DMXTEND-1 and Line LT-DMXTEND-2.
................................................................................................................................................
34
Use the
................................................................................................................................................
35 Configure Timing/Sync
The
................................................................................................................................................
36
Under the
and to
................................................................................................................................................
37 OK
Click
................................................................................................................................................
38
In order to verify proper communications with the adjacent Alcatel-Lucent 1665
DMXtend nodes, execute the following command from the
Administration > OSI-Neighbor-Map
Result:
OLIU and port they are connected to.
................................................................................................................................................
39
In order to verify proper network DCC communications, execute the following command
from the
Administration > OSI-Routing-Map
Result:
................................................................................................................................................
40
Perform steps in this procedure on all adjacent nodes in the ring.
........................................................................................................................................................................
Alcatel-Lucent 1665 DMXtend R10.0
365-372-327R10.0 Issue 1
January 2013
Network-side
select
GUI
to change the system timing.
System Timing
tab set the
Line
at LT-DMXTEND-2.
to issue the command.
The TIDs and NSAPs of adjacent nodes will be displayed along with the
GUI
.
The TIDs and NSAPs of all the nodes in the TARP area will be displayed.
.
Configuration > Timing Sync
window will be displayed.
Timing Mode: Free Running
to at LT-DMXTEND-1
GUI
.
7 - 9