Alcatel-Lucent 1665 Installation Manual page 179

Stand-alone node setup
........................................................................................................................................................................
................................................................................................................................................
5
After reading the Legal Notice, click
................................................................................................................................................
6
Under
................................................................................................................................................
7
Under
................................................................................................................................................
8
Under Connection Type, click on the drop-down menu arrow and choose Serial, OSI, or
TCP/IP depending on the type of connection you are using.
Note:
SYSCTL (LNW2) displays the boot code on initial turn up and the 5.1 bootcode is
indicated by a flashing M P 5 1 in the display. When the bootcode is 5.1 or higher, the
SYSCTL has a default IP address of 169.254.1.1. If the PC's LAN card to is
configured as DHCP, the SYSCTL will provide the PC with an IP address within a
minute or so. Connection through TCP/IP is now possible using the default IP address
of 169.254.1.1.
........................................................................................................................................................................
Alcatel-Lucent 1665 DMXtend R10.0
365-372-327R10.0 Issue 1
January 2013
, enter LT-DMXTEND.
NE Name
, select DMXtend from the drop-down list.
NE Type
TCP/IP is available when the SYSCTL has a bootcode of 5.1 or higher. The
and the following window appears.
OK
5 - 9