............................................................................................................................................................................................................................................................

Place the circuit pack into the shelf (slot D2 or G2 as required). Do NOT engage the

circuit pack in the backplane connector.

Repeat

LNW18 or LNW20 circuit pack.

Check off the appropriate box in the

N D

........................................................................................................................................................

LNW31 (OC-48 OLIU) low-speed installation (optional)

Follow this procedure only if installing LNW31 (OC-48 OLIU) circuit packs into the

Alcatel-Lucent 1665 DMXtend shelf.

See the engineering job specification. Identify the proper function group(s) and/or growth

slot(s) where LNW31 circuit pack will be installed.

Remove the LNW31 from the packing material.

Place the circuit pack into the shelf (slot D1 or G1 as required). Do NOT engage the

circuit pack in the backplane connector.

If a companion circuit pack is required, continue with the

LNW98 Apparatus Blank into the protection circuit pack slot (D2 or G2 as required), then

proceed to

Note:

provide proper air flow for cooling.

Remove the second LNW31 from the packing material.

Place the circuit pack into the shelf (slot D2 or G2 as required).

Alcatel-Lucent 1665 DMXtend R10.0

365-372-327R10.0 Issue 1

January 2013

Step 1

through

Step 6

T E P S

Step

177D or LNW98 Apparatus Blanks are required in all unused slots D and G to

for each additional function group to be equipped with

Table I-2, "Installation checklist" (p.

I-6).

Step

5. If not, install a 177D or

4 - 1 5

Table of Contents

Alcatel-Lucent 1665 Installation Manual page 149

Related Manuals for Alcatel-Lucent 1665

Related Products for Alcatel-Lucent 1665

Table of Contents