Alcatel-Lucent 1665 Installation Manual page 155

Circuit pack installation
............................................................................................................................................................................................................................................................
1665 Data Multiplexer Extend (DMXtend) Applications and Planning Guide, 365-
372-324 for allowed combinations.
........................................................................................................................................................................................................................
2
Remove the LNW63 or LNW64 circuit pack from the packing material.
........................................................................................................................................................................................................................
3
Place the circuit pack into the shelf (slot D1 or G1 as required). Do NOT engage the
circuit pack in the backplane connector.
........................................................................................................................................................................................................................
4
Install a 177D or LNW98 Apparatus Blank into the companion circuit pack slot (D2 or G2
as required).
Important!
to provide proper air flow for cooling.
........................................................................................................................................................................................................................
5
Repeat
LNW63 or LNW64 circuit packs.
........................................................................................................................................................................................................................
6
Install the PTM module per
........................................................................................................................................................................................................................
7
Check off the appropriate box in the
E O
N D
........................................................................................................................................................
LNW73/73C (4-Fiber channel FICON/ESCON) installation (optional)
Follow this procedure only if installing LNW73 or LNW73C circuit packs into the
Alcatel-Lucent 1665 DMXtend shelf.
........................................................................................................................................................................................................................
1
See the engineering job specification. Identify the proper function group slot (D1 or G1)
where the LNW73/73C circuit pack will be installed.
Note:
unless the LNW141 or LNW84 VLF main OLIU is used. See Alcatel-Lucent 1665
Data Multiplexer Extend (DMXtend) Applications and Planning Guide, 365-372-324
for allowed combinations.
............................................................................................................................................................................................................................................................
Alcatel-Lucent 1665 DMXtend R10.0
365-372-327R10.0 Issue 1
January 2013
177D or LNW98 Apparatus Blanks are required in all unused slots D and G
Step 1 through Step 4
Appendix
S
F T E P S
LNW73/73C circuit pack can only be installed in slot 1 of any function group
for each additional function group to be equipped with
B, Install pluggable modules (p.
Table I-2, Installation
B-8).
checklist.
4 - 2 1