Alcatel-Lucent 1665 Installation Manual page 15

About this document
............................................................................................................................................................................................................................................................
Chapter 4, "Circuit pack installation"
This chapter provides information for verifying that the shelf is being supplied with the
proper power and provides instructions for circuit pack installation.
Part II: "Stand-alone installation tests"
Part II covers Chapters 5 and 6. These sections cover the initial Graphical User Interface
(GUI) or Craft Interface Terminal (CIT) software installation and turn-up testing on a new
Alcatel-Lucent 1665 DMXtend shelf. It is intended to verify correct electrical
DS1/DS3/FE cable wiring to the DSX panel or punch down block as well SONET fiber
routing to the LGX panel from the faceplates of installed packs. This section also the
recommended checklist
Lucent 1665 Data Multiplexer Extend (Alcatel-Lucent 1665 DMXtend) system. Use of
the installation checklist is required to ensure a quality installation. All completed tasks
should be checked off and those not completed should be duly noted as to the reason why.
This checklist should be turned in as part of your job complete paperwork.
Chapter 5, "Stand-alone node setup"
This chapter provides procedures for initial Graphical User Interface (GUI) or Craft
Interface Terminal (CIT) software installation and circuit packs provided via work order.
Also, the use of the Graphical User Interface (GUI) or Craft Interface Terminal (CIT).
Chapter 6, "Stand-alone installation testing"
This chapter is to verify proper transmission cabling installation and R10.0 functionality
as well as the associated functionality of the Alcatel-Lucent 1665 DMXtend shelf.
Part III: "Network turn-up and testing"
Part III covers fiber connections between nodes in a ring. It is not intended to replace
acceptance test procedures. This section also provides the recommended checklist
"Installation checklist"
Use of the installation checklist is required to ensure a quality installation. All completed
tasks should be checked off and those not completed should be duly noted as to the reason
why. This checklist should be turned in as part of your job complete paperwork.
Chapter 7, "Connecting adjacent network elements"
This chapter is used to make fiber connections between nodes in a ring. It is not intended
to replace acceptance test procedures.
............................................................................................................................................................................................................................................................
Alcatel-Lucent 1665 DMXtend R10.0
365-372-327R10.0 Issue 1
January 2013
"Installation checklist"
to follow when installing a Alcatel-Lucent 1665 DMXtend system.
to follow when installing a Alcatel-
x v