Alcatel-Lucent 1665 Installation Manual page 142

Circuit pack installation
............................................................................................................................................................................................................................................................
Slot name
CTL
Notes:
1 177D Apparatus Blanks are required in all unequipped function unit slots to provide
proper air flow for cooling.
2 This pack will only work in slot 1 unless the shelf is equipped with LNW141 or
LNW84.
3 The LNW705 can onbly be installed in the G2 slot.
4 The LNW8/LNW801 circuit packs have common functionality and they are directly
interchangable. Therefore, an LNW8 and an LNW801 can occupy companion slots at
the same time.
5 LNW43 Apparatus Blanks or LNW96 System Detectable Blanks are required in all
unequipped A/B Slots to provide proper air flow for cooling.
6 LNW42 Apparatus Blanks or LNW95 System Detectable Blanks are required in all
unequipped Main Slots to provide proper air flow for cooling.
7 System Detectable Blank Card for slots D and G. Apparatus Blanks are required in all
unequipped function unit slots to provide proper air flow for cooling.
Switch fabric compatibility
When equipping high-speed slots, it is imperative that the switch fabric of the circuit packs
located in Main 1 and Main 2 match.
Table 4-3 OC-3 mains with 6 STS-1s of vt switch fabric
Table 4-4 OC-12 mains with 12 STS-1s of vt switch fabric
............................................................................................................................................................................................................................................................
4 - 8
A1/B1,
1
G1, G2 A2/B2
LNW96
7
LNW98
OC-3 Circuit packs
LNW40
LNW601
OC-12 Circuit packs
LNW38
LNW382
M1, M2 D1, D2
5
6
LNW95
LNW98
LNW149
LNW302
LNW51
1
7
Alcatel-Lucent 1665 DMXtend R10.0
365-372-327R10.0 Issue 1
January 2013