Alcatel-Lucent 1665 Installation Manual page 196

Stand-alone installation testing
............................................................................................................................................................................................................................................................
Result:
of the QRSS signal.
........................................................................................................................................................................................................................
24
Remove the test set connections from the DSX-1.
........................................................................................................................................................................................................................
25
Use the e
........................................................................................................................................................................................................................
26
Click on
........................................................................................................................................................................................................................
27 Yes
Click
Result:
from the DSX-1.
........................................................................................................................................................................................................................
28
Repeat
function unit, substituting the following address information.
............................................................................................................................................................................................................................................................
6 - 1 2
The DS-1 test set should indicate a blue (AIS) signal is being received in place
upd-sys
to send an
GUI
Configuration > Update System > Update All
to issue the command.
This command will remove alarms generated by removing the test signals
Step 2 through Step 27
Tributary
@ DSX-1
2
3
4
5
6
7
8
9
10
11
12
13
14
command.
to test each of the remaining DS-1 tributaries of the
Cross-connect
m1-1-1-1-2,a1-1-1-2
m1-1-1-1-3,a1-1-1-3
m1-1-1-1-4,a1-1-1-4
m1-1-1-2-1,a1-1-2-1
m1-1-1-2-2,a1-1-2-2
m1-1-1-2-3,a1-1-2-3
m1-1-1-2-4,a1-1-2-4
m1-1-1-3-1,a1-1-3-1
m1-1-1-3-2,a1-1-3-2
m1-1-1-3-3,a1-1-3-3
m1-1-1-3-4,a1-1-3-4
m1-1-1-4-1,a1-1-4-1
m1-1-1-4-2,a1-1-4-2
.
Alcatel-Lucent 1665 DMXtend R10.0
365-372-327R10.0 Issue 1
January 2013