Alcatel-Lucent 1665 Installation Manual page 254

Connecting adjacent network elements
........................................................................................................................................................................
•
A properly grounded ESD wrist strap MUST be worn when handling circuit packs.
Unterminated optical connectors may emit laser radiation. Do not view beam with
optical instruments.
Steps
The following procedures are performed at each end of the optical span being tested.
................................................................................................................................................
1
Verify that the office alarm cable to J13 (ALM) on the backplane of the Alcatel-Lucent
1665 DMXtend shelf is disconnected. If the shelf to be tested is part of a multiple shelf
bay arrangement, the office alarm cable connects to shelf 1.
................................................................................................................................................
2
Enter the shelf TID per the customer order or use LT-DMXTEND-1 and LT-DMXTEND-
2 as defaults.
................................................................................................................................................
3
Use the
................................................................................................................................................
4
Click on
................................................................................................................................................
5 Set NE window
In the
•
•
................................................................................................................................................
6
Use the
................................................................................................................................................
7 GUI
In the
........................................................................................................................................................................
7 - 4
A properly grounded ESD wrist strap must always be worn while handling circuit
packs.
CAUTION
ESD hazard
WARNING
Laser hazard
Graphical User Interface (GUI)
Administration > Set NE...
click on:
Remote NE Status: Enabled
AGNE: Enabled
GUI
to enable the Remote NE Status at all nodes.
screen for each NE click on
to enable the AGNE at LT-DMXTEND-1 only.
Administration > Set NE...
Alcatel-Lucent 1665 DMXtend R10.0
365-372-327R10.0 Issue 1
January 2013