Alcatel-Lucent 1665 Installation Manual page 201

Stand-alone installation testing
............................................................................................................................................................................................................................................................
........................................................................................................................................................................................................................
2
Connect a cable from the DS3 test set transmit connection to the IN jack of the DSX-3
associated with the first DS3 tributary of the Alcatel-Lucent 1665 DMXtend function unit
slot to be tested.
........................................................................................................................................................................................................................
3
Connect a cable from the DS3 test set receive connection to the OUT jack of the DSX-3
associated with the first DS3 tributary of the Alcatel-Lucent 1665 DMXtend function unit
slot to be tested.
Result:
DS3 pack.
........................................................................................................................................................................................................................
4
Use the GUI command to enter cross-connects.
........................................................................................................................................................................................................................
5
Click Configuration:Cross-Connections.
........................................................................................................................................................................................................................
6
Select Create a new cross-connection.
........................................................................................................................................................................................................................
7
Select Next.
........................................................................................................................................................................................................................
8
Select Rate= STS1: Type of Cross-connect= UPSR Add/Drop.
........................................................................................................................................................................................................................
9
Select Next.
........................................................................................................................................................................................................................
10
Select main1-1-1 to [b,d,g]1-1.
........................................................................................................................................................................................................................
11
Click Finish to issue the command.
Requirement:
To check that the port on the DS3 pack is receiving the signal, verify that the port has
transitioned to an "in service" state with the View:Equipment command.
............................................................................................................................................................................................................................................................
Alcatel-Lucent 1665 DMXtend R10.0
365-372-327R10.0 Issue 1
January 2013
The DS3 test set should indicate a blue (AIS) signal is being received for a
The DS3 test set should indicate it is receiving an error free PRBS signal.
6 - 1 7