Alcatel-Lucent 1665 Installation Manual page 157

Circuit pack installation
............................................................................................................................................................................................................................................................
Lucent 1665 Data Multiplexer Extend (DMXtend) Applications and Planning Guide,
365-372-324 for allowed combinations.
The LNW910 requires VLF mains can be installed in either or both slots of a function
or growth group.
Note:
16 10/100BASE-TX ports that are cabled from the rear of the shelf.
Note:
Ethernet pack. The ports can be populated with either, 4 optical, 8 electrical PTMs, or
a mix of 4 electrical and 4 optical PTMs.
........................................................................................................................................................................................................................
2
Remove the pack from the packing material.
........................................................................................................................................................................................................................
3
Place the circuit pack into the shelf (slot D1 or G1 as required). Do NOT engage the
circuit pack in the backplane connector.
........................................................................................................................................................................................................................
4
Install a 177D or LNW98 Apparatus Blank into the companion circuit pack slot (D2 or G2
as required).
Note:
provide proper air flow for cooling.
........................................................................................................................................................................................................................
5
Repeat
required) to be equipped with LNW74, LNW87, or LNW910 circuit packs.
........................................................................................................................................................................................................................
6
Install the PTM module per
........................................................................................................................................................................................................................
7
Check off the appropriate box in the
E O
N D
........................................................................................................................................................
LNW170 (100/1G FXS)
Follow this procedure only if installing LNW170 circuit packs into the Alcatel-Lucent
1665 DMXtend shelf.
............................................................................................................................................................................................................................................................
Alcatel-Lucent 1665 DMXtend R10.0
365-372-327R10.0 Issue 1
January 2013
The LNW74 has 4 100BASE-LX ports that require PTM optics in addition to
The LNW87 is a 8-port, PTM-based Private Line Fast Ethernet/Gigabit
177D or LNW98 Apparatus Blanks are required in all unused slots D and G to
Step 1 through Step 4
Appendix
S
F T E P S
for each additional function group (slot D1 or G1 as
B, Install pluggable modules (p.
"Installation checklist" (p.
B-8).
I-6).
4 - 2 3