Replacing An Emi Filler Panel; Figure 8-5 Removing And Replacing The Bezel Emi Filler Panel; Figure 8-6 Removing And Replacing The Rma Emi Filler Panel - Sun Microsystems Ultra 60 Service Manual

FIGURE 8-5
RMA
Filler panel (3)
FIGURE 8-6
8.5.2

Replacing an EMI Filler Panel

1. Position and snap the EMI filler panel into the RMA (
2. Replace the RMA.
See Section 9.2.6, "Replacing the RMA" on page 9-9.
3. Position and snap the EMI filler panel into the bezel (
Removing and Replacing the Bezel EMI Filler Panel
Removing and Replacing the RMA EMI Filler Panel
Bezel
EMI Filler panel (3)
FIGURE 8-6
FIGURE 8-5
Chapter 8 Major Subassemblies
).
).
8-15