Panel Tone - Ricoh Aficio MP1812L Operating Instructions Manual

When the Machine Does Not Operate As Wanted

Panel Tone

The following table explains the various beep patterns that the machine produces
to alert users about originals left on the machine and other machine conditions.
1
Beep pattern
Two long beeps.
Single short beep.
Single long beep.
Five long beeps repeated
four times.
Five short beeps repeated
five times.
Note
❒ Users cannot mute the machine's beep alerts. When the machine beeps to alert
users of a paper jam or toner request, if the machine's covers are opened and
closed repeatedly within a short space of time, the beep alert might continue,
even after normal status has resumed.
Reference
For details about enabling or disabling beep alerts, see "General Features",
General Settings Guide.
4
Meaning
Machine has warmed
up.
A valid operation is
accepted.
Job completed.
Soft alert.
Strong alert.
Cause
After cooling or being switched on, the
machine has fully warmed up and is
ready for use.
A control panel or screen key was
pressed, the machine was switched on,
or a document was set on the ADF or
ARDF.
A Copier Features job has finished.
An original has been left on the expo-
sure glass or paper has run out.
Machine requires user attention. Paper
might have jammed or toner might need
replenishing.