Table of Contents
Advertisement
198
4-3. Operating the lights and wipers
after turning the engine switch
off.
Pull the lever toward you and release it
again to turn off the lights.
Cornering lights (vehicles with
front fog lights)
When the following conditions are met,
while the headlights (low beam) are on,
the cornering lights will additionally
turn on and light up the direction of
movement for the vehicle. This is to
ensure excellent visibility when either
driving at intersections or parking at
night.
The steering wheel is operated
The turn signal lever is operated
The shift lever is in R
■
Cornering light control
However, when vehicle speed is 40 km/h
●
(25 mph) or above, the cornering lights
do not turn on.
After the lights remain illuminated for 30
●
minutes, they automatically turn off.
LEXUS NX300/NX200 Owners Manual̲General̲M78540̲en
AHS (Adaptive High-beam
*
System)
*
: If equipped
The Adaptive High-beam System
uses a camera sensor located
behind the upper portion of the
windshield to assess the brightness
of the lights of vehicles ahead,
streetlights, etc., and automatically
controls the headlight light distribu-
tion as necessary.
WARNING
■
Limitations of the Adaptive High-
beam System
Do not overly rely on the Adaptive High-
beam System. Always drive safely, taking
care to observe your surroundings and
turning the high beams on or off manu-
ally if necessary.
■
To prevent incorrect operation of the
Adaptive High-beam System
Do not overload the vehicle.
High-beam switch control
Adjusts the brightness and illumi-
nated area of the high beams
according to the vehicle speed.
Adjusts the intensity of the high
beams, while driving on a curve, so
that the area in the direction that the
vehicle is turning will be illuminated
more brightly than other areas.
Operates the shaded high beams so
that the area around vehicles ahead
is partially not illuminated while all
other areas continue to be illumi-
Advertisement
Table of Contents
