Driving Position Memory - Lexus NX 300 Owner's Manual

Driving position memory

*
: If equipped
This feature automatically adjusts
the front seats, steering wheel and
outside rear view mirrors to make
entering and exiting the vehicle
easier or to suit your preferences.
Three different driving positions
can be recorded into memory.
Each electronic key (including a
card key) can be registered to
recall your preferred driving posi-
tion.
Enabling easier driver entry and
exit (Power easy access system)
When all of the following have been
performed, the driver's seat and steer-
ing wheel are automatically adjusted to
a position that allows driver to enter
and exit the vehicle easily.
• The shift lever has been shifted to P.
• The engine switch has been turned
off.
• The driver's seat belt has been
unfastened.
When any of the following has been
LEXUS NX300/NX200 Owners Manual̲General̲M78540̲en
3-3. Adjusting the seats
performed, the driver's seat and steer-
*
ing wheel automatically return to their
original positions.
• The engine switch has been turned
to ACCESSORY mode or IGNI-
TION ON mode.
• The driver's seat belt has been fas-
tened.
■ Operation of the power easy access sys-
tem
When exiting the vehicle, the power easy
access system may not operate if the seat is
already close to the rearmost position, etc.
■ Customization
The seat movement amount settings of the
power easy access system can be custom-
ized. (Customizable features: P.482)
Recording a driving position into
memory
1
Check that the shift lever is in P.
2 Turn the engine switch to IGNI-
TION ON mode.
3
Adjust the driver's seat, steering
wheel and outside rear view mir-
rors to the desired positions.
4
While pressing the "SET" button, or
within 3 seconds after the "SET"
button is pressed, press button "1",
"2" or "3" until the buzzer sounds.
If the selected button has already been
preset, the previously recorded position
141
3