Table of Contents
Advertisement
Turning Lexus parking assist-sen-
sor on/off
Lexus parking assist-sensor can be
enabled/disabled on the multi-informa-
tion display as following:
1
Press
switches and select
2
Press
switches and select "PKSA".
3
Press
switches, select
press
ting (on/off).
If the system is enabled, the Lexus
parking assist-sensor indicator light will
turn on.
When ON (enable) is selected, the
Lexus parking assist-sensor indicator
comes on.
When switched to OFF (disable) and
the Lexus parking assist-sensor is
deactivated, the system will not reacti-
vate if it is not switched to ON again
from the
mation display (Will not reactivate via
engine switch operations).
LEXUS NX300/NX200 Owners Manual̲General̲M78540̲en
or
of meter control
.
or
of meter control
or
of meter control
, and then
to select the desired set-
screen of the multi-infor-
4-5. Using the driving support systems
The Lexus parking assist-sensor can be
■
operated when
●
The engine switch is in IGNITION ON
mode.
Lexus parking assist-sensor function is
●
on.
The vehicle speed is less than about 10
●
km/h (6 mph).
●
A shift position other than P is selected.
Setting the buzzer volume
■
The buzzer volume can be adjusted on the
multi-information display. (P.277)
Muting the buzzer sound
■
●
To mute the buzzer sound
The buzzer can be temporarily muted by
pressing
of the meter control
switches while an obstacle detection dis-
play is shown on the multi-information
display.
●
To cancel the mute
Mute will be automatically canceled in
the following situations.
• When the shift position is changed
• When the vehicle speed has reached or
exceeded approximately 10km/h (6
mph) with the shift lever in D
• When the Lexus parking assist is turned
off once and turned on again
• When the engine switch is turned off
once and turned to IGNITION ON
mode again
• When a sensor is malfunctioning
Lexus parking assist-sensor display
■
When an obstacle is detected while the rear
279
4
Advertisement
Table of Contents
