Table of Contents
Advertisement
72
1-2. Child safety
wise, put the head restraint in the
upper most position. (P.145)
2
Open the top tether anchorage
cover, latch the hook onto the top
tether anchorage and tighten the
top strap.
Make sure the top strap is securely latched.
(P.70) When installing the child restraint
system with the head restraint being raised,
be sure to have the top strap pass under-
neath the head restraint.
Hook
A
Top strap
B
WARNING
■
When installing a child restraint sys-
tem
Observe the following precautions.
Failure to do so may result in death or
serious injury.
●
Firmly attach the top strap and make
sure that the belt is not twisted.
LEXUS NX300/NX200 Owners Manual̲General̲M78540̲en
●
Do not attach the top strap to anything
other than the top tether anchorage.
●
After securing a child restraint system,
never adjust the seat.
Follow all installation instructions pro-
●
vided by the child restraint system
manufacturer.
When installing the child restraint sys-
●
tem with the head restraint being
raised, after the head restraint has
been raised and then the top tether
anchorage has been fixed, do not
lower the head restraint.
NOTICE
■
Top tether anchorages
When not in use, make certain to close
the lid. If it remains open, the lid may be
damaged.
Advertisement
Table of Contents
