Lexus NX 300 Owner's Manual page 239

Hide thumbs Also See for NX 300:
Table of Contents

Advertisement

238
4-5. Using the driving support systems
Inside of displayed lines is white
Indicates that the system is recognizing
white (yellow) lines or a course
vehicle departs from its lane, the white line
displayed on the side the vehicle departs
from flashes orange.
Inside of displayed lines is black
Indicates that the system is not able to rec-
ognize white (yellow) lines or a course
is temporarily canceled.
*
: Boundary between asphalt and the side
of the road, such as grass, soil, or a curb
Operation conditions of each function
Lane departure alert function
This function operates when all of the fol-
lowing conditions are met.
• LTA is turned on.
• Vehicle speed is approximately 50 km/h
(32 mph) or more.
• System recognizes white (yellow) lane
lines or a course
LEXUS NX300/NX200 Owners Manual̲General̲M78540̲en
*
. When the
*
or
*1
*2
. (When a white [yel-
*2
low] line or course
is recognized on
only one side, the system will operate
only for the recognized side.)
• Width of traffic lane is approximately 3 m
(9.8 ft.) or more.
• Turn signal lever is not operated.
• Vehicle is not being driven around a
sharp curve.
• No system malfunctions are detected.
(P.240)
*1
: The function operates even if the vehicle
speed is less than approximately 50
km/h (32 mph) when the lane centering
function is operating.
*2
: Boundary between asphalt and the side
of the road, such as grass, soil, or a curb
Steering assist function
This function operates when all of the fol-
lowing conditions are met in addition to the
operation conditions for the lane departure
alert function.
• Setting for "Steering Assist" in
multi-information display is set to "On".
(P.90)
• Vehicle is not accelerated or decelerated
by a fixed amount or more.
• Steering wheel is not operated with a
steering force level suitable for changing
lanes.
• ABS, VSC, TRC and PCS are not oper-
ating.
• TRC or VSC is not turned off.
• Hands off steering wheel warning is not
displayed. (P.239)
Vehicle sway warning function
This function operates when all of the fol-
lowing conditions are met.
• Setting for "Sway Warning" in
multi-information display is set to "On".
(P.90)
• Vehicle speed is approximately 50 km/h
(32 mph) or more.
• Width of traffic lane is approximately 3 m
(9.8 ft.) or more.
• No system malfunctions are detected.
of the
of the

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nx 200

Table of Contents