Table of Contents
Advertisement
vehicle.
1
Turn the engine switch off.
2
Press the intrusion sensor and tilt
sensor cancel switch.
A message will be shown on the multi-
information display in the instrument clus-
ter.
The intrusion sensor and tilt sensor will
revert to on each time the engine switch is
turned to IGNITION ON mode.
Canceling and automatic re-enabling of
■
the intrusion sensor and tilt sensor
●
The alarm will still be set even when the
intrusion sensor and tilt sensor are can-
celed.
After the intrusion sensor and tilt sensor
●
are canceled, pressing the engine switch
or unlocking the doors using the entry
function (if equipped) or wireless remote
control will re-enable the intrusion sensor
and tilt sensor.
●
The intrusion sensor and tilt sensor will
automatically be re-enabled when the
alarm system is reactivated.
Intrusion sensor detection consider-
■
ations
The sensor may trigger the alarm in the fol-
lowing situations:
●
People or pets are in the vehicle.
LEXUS NX300/NX200 Owners Manual̲General̲M78540̲en
1-3. Theft deterrent system
●
A window or the moon roof (if equipped)
is open.
In this case, the sensor may detect the fol-
lowing:
• Wind or the movement of objects such as
leaves and insects inside the vehicle
• Ultrasonic waves emitted from devices
such as the intrusion sensors of other
vehicles
• The movement of people outside the
vehicle
●
Unstable items, such as dangling acces-
sories or clothes hanging on the coat
hooks, are in the vehicle.
The vehicle is parked in a place where
●
extreme vibrations or noises occur, such
as in a parking garage.
79
1
Advertisement
Table of Contents
