Table of Contents
Advertisement
• When the distance between your vehicle
and a following vehicle is short
• When a bicycle carrier or other acces-
sory is installed to the rear of the vehicle
• When towing a trailer (vehicles with tow-
ing package)
The Rear Cross Traffic Alert function (if equipped)
The Rear Cross Traffic Alert function operates when your vehicle is in reverse. It
can detect other vehicles approaching from the right or left rear of the vehicle. It
uses radar sensors to alert the driver of the other vehicle's existence through flash-
ing the BSM outside rear view mirror indicators and sounding a buzzer.
Approaching vehicles
A
Detection areas
B
Rear Cross Traffic Alert icon dis-
■
play (if equipped)
When a vehicle approaching from the
right or left at the rear of the vehicle is
detected, the following will be dis-
LEXUS NX300/NX200 Owners Manual̲General̲M78540̲en
4-5. Using the driving support systems
WARNING
Cautions regarding the use of the sys-
■
tem
The driver is solely responsible for safe
driving. Always drive safely, taking care
to observe your surroundings.
The Blind Spot Monitor function is a sup-
plementary function which alerts the
driver that a vehicle is present in the blind
spot. Do not overly rely on the Blind Spot
Monitor function. The function cannot
judge if it is safe to change lanes, there-
fore over reliance could cause an acci-
dent resulting in death or serious injury.
According to conditions, the system may
not function correctly. Therefore the
driver's own visual confirmation of safety
is necessary.
played on the navigation/multimedia
system screen.
Lexus parking assist monitor
A vehicle is approaching from the left
or right at the rear of the vehicle
301
4
Advertisement
Table of Contents
